It is important to wait at least a year before sealing concrete pavers from the date of installation. Concrete pavers have to cure and must go through a four-season cycle of weathering. This allows most of the lime from the paver’s surface to come out. After the cleaning and pressure washing process, all the lime

Polymeric sand is best to use to fill the joints in between pavers. High quality polymeric sand will not leave any stains on the surface. Gappsi vibrates the pavers while sweeping which allows the send to fill the joints tight and also help the sand harden. Sweeping the excess sand off the pavers before wetting

There are many manufactures of sealers, from solvents to acrylic urethane. Epoxies, acrylic, and urethane sealers come in water-based versions and solvent-based versions, including combinations of both. The biggest difference between the two is the VOC content. The sheen and life of the product determines how often it lasts before needing to be reapplied. Solvent-based

Yes! All concrete and paver surfaces should be cleaned before applying any sealer coating. It is very important that the surface is clean because any stains or materials that get trapped under the sealer will not be able to be cleaned after it’s sealed. Pressure washing pavers is just as important as sealing it. Using

Best Long Island Paver Restoration Company Yes! Concrete pavers should be sealed. Paving stones are manufactured with the highest quality cement, but cement is a corrosive material that wears under natural elements. The sun, rain and cold, can easily wear the surface of pavers, and a good sealing job with the right sealing product, applied

Schedule an Appointment with a Gappsi Representative. Paving stone driveway installed by Gappsi in 2008, got refurbished with the cleaning and sealing process. Using low pressure hot water the pavers surface gets clean uniformly with no impact of wear on the stone surface. The joints in between the pavers got filled with high quality polymeric

Nassau County Gunite Swimming Pool Company Gunite pool built indoor, with safety auto cover to help minimize the amount of steam rising from the heated water in to the room. Gappsi constructed the swimming pool and the room addition for this residence in Nassau Long island NY. The coping and patio installed were Cambridge Ledgestone

Long island NY Swimming Pool Builders Vinyl Swimming pool built in floral Park with safety auto cover By Gappsi. Molded monolithic concrete Pour for walls and steps.

Schedule an appointment with a Gappsi Representative Concrete wall vinyl lined Swimming pool Built by Gappsi in Dix Hills Suffolk County NY. With full stadium stairs along shallow end wall, and Fiberglass spillover spas overall pool size is 20 x 40 3.5 to 8 feet deep with a diving board, Salt water chlorine generator and

Schedule an appointment with a Gappsi Representative. Concrete wall vinyl lined Swimming pool Built by Gappsi in Brightwater NY. With full stadium stairs along shallow end wall, overall pool size is 16×36 , 3.5 to 6 feet deep Salt water chlorine generator and also a full automated safety cover. To learn more about Gappsi products,

Suffolk County 27543-H1 9-10-99 to present, 15435-H1 7-1-88 to 7-1-97  Nassau County H2209100000  Southampton L002384  NYC and The Five Boroughs 1321423

TOP
Visit Us On FacebookVisit Us On LinkedinVisit Us On TwitterVisit Us On Google PlusCheck Our FeedVisit Us On Instagram