The driveway installation started with the excavation of existing asphalt and sub base. New concrete base with fiber mesh was installed with Amagansett granite pavers is laid over a thin layer of graded sand. Stone was selected from the Gappsi natural stone collection. Jumbo Belgian block was installed for the street curb and driveway entrance. The

This 16’x32′ freeform gunite swimming pool custom constructed in Massapequa NY. The pool shell consists of 10″ concrete walls and an 8″ concrete floor. The pool was shot with gunite cement, over 6″ of over sized gravel base, 12 inches on center, 1/2” rebar metal cage and 6″ apart center rods in any areas that

Front door entrance way step and platforms built with oyster blend mini colonial wall and granite city caps. Walkway inlay from steps to street extends the entrance way. Retaining walls built on both sides of the driveway and oyster blend stone ridge were used for walkway platforms and to border the asphalt driveway inlay. Gappsi

This front yard natural stone walkway and wall veneer were installed in Hauppauge, NY 11788. The walkway is 150 square feet and the wall veneer is 80 square feet of Fiorito travertine. Installation of the walkway was constructed with a recycled concrete base and a layer of fine sand. The wall veneer was installed on a wire

Nicolock oyster ridge stone pavers being sealed in Patchogue NY 11772. The sealing process begins with pressure washing the entire patio, removing all dirt/debris from the stone surface and in between the joints. Next, Nexgel Techniseal synthetic sand is applied in between the pavers joints and vibrated with a mechanical plate compactor. The plate compactor

Nicolock oyster blend rustico pavers being sealed in Huntington NY 11743. The sealing process begins with pressure washing the entire patio, removing all dirt/debris from the stone surface and in between the joints. Next, Nexgel Techniseal synthetic sand is applied in between the pavers joints and vibrated with a mechanical plate compactor. The plate compactor

This 16′ by 32′ vinyl pool was built with concrete walls and liner. The pool has steps across the full width of the shallow end and a standing ledge/two corner benches in the deep end. The pool is also equipped with an auto cover. Stoops were built by backyard sliding doors with platforms and several

This 20′ by 50′ gunite swimming pool was built in Cold Spring Harbor Long Island, NY. This gunite swimming pool has a double Roman end shape with a raised spillover spa along the 50′ side. Steps are incorporated on each side of the spa for entering and exiting the pool. A full-width sun deck is

After the construction of a two-story colonial brick house, this backyard was left as an open canvas for a full creative design that included a plethora of amenities. Starting with a raised patio and balcony railing, this allows comfortable daily use to walk out of the house to the barbecue or to use the spa. The spa

This outdoor kitchen was built in a U shape layout. It incorporates many amenities such as twin eagle appliances, pizza oven, outdoor refrigerator, ice makers, cook top and a bar sink. The colorful out door lighting creates a inviting atmosphere for friends and family. The shell was veneered with Fiorito veneer travertine selected from the

Suffolk County 27543-H1 9-10-99 to present, 15435-H1 7-1-88 to 7-1-97  Nassau County H2209100000  Southampton L002384  NYC and The Five Boroughs 1321423

Long Island Web Design
TOP
Visit Us On FacebookVisit Us On LinkedinVisit Us On TwitterVisit Us On Google Plus