Snaps-Sports Distributor & installer on Long Island NY

It is important to wait at least a year before sealing concrete pavers from the date of installation. Concrete pavers have to cure and must go through a four-season cycle of weathering. This allows most of the lime from the paver’s surface to come out. After the cleaning and pressure washing process, all the lime

Polymeric sand is best to use to fill the joints in between pavers. High quality polymeric sand will not leave any stains on the surface. Gappsi vibrates the pavers while sweeping which allows the send to fill the joints tight and also help the sand harden. Sweeping the excess sand off the pavers before wetting

There are many manufactures of sealers, from solvents to acrylic urethane. Epoxies, acrylic, and urethane sealers come in water-based versions and solvent-based versions, including combinations of both. The biggest difference between the two is the VOC content. The sheen and life of the product determines how often it lasts before needing to be reapplied. Solvent-based

Yes! All concrete and paver surfaces should be cleaned before applying any sealer coating. It is very important that the surface is clean because any stains or materials that get trapped under the sealer will not be able to be cleaned after it’s sealed. Pressure washing pavers is just as important as sealing it. Using

Best Long Island Paver Restoration Company Yes! Concrete pavers should be sealed. Paving stones are manufactured with the highest quality cement, but cement is a corrosive material that wears under natural elements. The sun, rain and cold, can easily wear the surface of pavers, and a good sealing job with the right sealing product, applied

Schedule an Appointment with a Gappsi Representative. Paving stone driveway installed by Gappsi in 2008, got refurbished with the cleaning and sealing process. Using low pressure hot water the pavers surface gets clean uniformly with no impact of wear on the stone surface. The joints in between the pavers got filled with high quality polymeric

Nassau County Gunite Swimming Pool Company Gunite pool built indoor, with safety auto cover to help minimize the amount of steam rising from the heated water in to the room. Gappsi constructed the swimming pool and the room addition for this residence in Nassau Long island NY. The coping and patio installed were Cambridge Ledgestone

Long island NY Swimming Pool Builders Vinyl Swimming pool built in floral Park with safety auto cover By Gappsi. Molded monolithic concrete Pour for walls and steps.

Long Island Gunite Swimming Pool Company 20×40 Gunite swimming pool and spa, built separate and sharing same equipment, including filters and heater. Both spa and pool were finished with onyx diamond brite and gray porcelain tile trim. The backyard design incorporates a pool house and glass railings to separate it from the rest of the