This was a 1960’s kitchen that was in desperate need of a makeover. We closed up the back door and put in a smaller window to create a functional “L” shaped kitchen. The Island seats 3, provides additional storage and includes a microwave.
The addition of a sliding door in the adjacent dining room allows entry to an outside deck.
Furnished with Grohe faucet, Samsung appliances, Quartz countertops, Hudson light pendants,
The homeowner is thrilled with their updated modern kitchen.
Designed by Giuseppe Abbrancati and installed by Gappsi, this swimming pool patio displays Winter Cream marble pavers from Bay Rock suppliers. A primary white marble with a smooth textured, semi-polished finish and tumbled edges. The pool coping is also polished winter cream marble. A raised patio area was built with columns on each side including spillover water bowls. These water bowls are made of a transparent resin that allows the light that is inside of the bowl to come through. The red light inside the spill over bowl is made to mimic fire, creating a very impressive special effect. The sun deck also incorporates a sheer descent with wall washer lights mounted underneath the coping of the sun deck, steps, and columns.
It is important to wait at least a year before sealing concrete pavers from the date of installation. Concrete pavers have to cure and must go through a four-season cycle of weathering. This allows most of the lime from the paver’s surface to come out. After the cleaning and pressure washing process, all the lime from the surface gets removed and the color of the stones gets exposed, this allows the sealer to capture the best of the pavers and preserve it that way. The life of the sealer is contingent to how well it has been applied. Three to five years is recommended by most sealer manufactures, and usually people reseal the driveway and pavers that often. But what’s most important is that pavers are sealed right one time and even though the sheen will go away, or some dust my sit on the surface, the sealer that penetrated the surface of the pavers has created that will be present for many years preventing the pavers from edging.
Polymeric sand is best to use to fill the joints in between pavers. High quality polymeric sand will not leave any stains on the surface. Gappsi vibrates the pavers while sweeping which allows the send to fill the joints tight and also help the sand harden. Sweeping the excess sand off the pavers before wetting the sand is also very important. This prevents the glue that is in the sand to smear the pavers surface. Most importantly, applying a good urethane sealer will further help the sand to harden and prevent ants from digging into the paver joints and weeds from growing on patios.