Cleaning and sealing limestone driveway pavers in Roslyn NY. Stones were pressure washed and joints filled with polymeric sand, vibrated wit rolling vibratory plates. Gappsi Exclusive sealer was applied to expose the color and details of the limestone pavers surface. Nassau County Long Island NY Stone Patios and Driveways Cleaning and Sealing Company

Granite driveway Designed and installed by Gappsi in Mount Sinai Long Island NY, with 6×9 granite pavers flamed and tumbled finished. Installation was done over poured concrete base and one inch of fine sand. This driveway was recently cleaned re-sanded and sealed with high quality Gappsi sealer Granite Driveway Contractor Mont Sinai Long Island NY

Backyard Pool Patio Contractor Westbury Long Island NY Backyard pool patio installed by Gappsi in Westbury NY with natural stone pavers. Scogli di mare limestone pool coping, 6×9 Melfi limestone random pattern and inlays of 6×9 scogli di mare pavers. Stoop and cocking island veneer were veneered with Fiorito travertine. The all pool and house

This putting green was designed by Giuseppe Abbrancati, with a custom design layout that incorporates 9 holes, a sand bunker and four island of White River rocks. Each island uniquely decorated with rocks and garden ornaments. The surface of the putting green is Go-green synthetic turf Platinum putt with ACADIA 70 oz Pile Height 1-3/4″

It is important to wait at least a year before sealing concrete pavers from the date of installation. Concrete pavers have to cure and must go through a four-season cycle of weathering. This allows most of the lime from the paver’s surface to come out. After the cleaning and pressure washing process, all the lime

Polymeric sand is best to use to fill the joints in between pavers. High quality polymeric sand will not leave any stains on the surface. Gappsi vibrates the pavers while sweeping which allows the send to fill the joints tight and also help the sand harden. Sweeping the excess sand off the pavers before wetting

Yes! All concrete and paver surfaces should be cleaned before applying any sealer coating. It is very important that the surface is clean because any stains or materials that get trapped under the sealer will not be able to be cleaned after it’s sealed. Pressure washing pavers is just as important as sealing it. Using

Best Long Island Paver Restoration Company Yes! Concrete pavers should be sealed. Paving stones are manufactured with the highest quality cement, but cement is a corrosive material that wears under natural elements. The sun, rain and cold, can easily wear the surface of pavers, and a good sealing job with the right sealing product, applied

Schedule an Appointment with a Gappsi Representative. Paving stone driveway installed by Gappsi in 2008, got refurbished with the cleaning and sealing process. Using low pressure hot water the pavers surface gets clean uniformly with no impact of wear on the stone surface. The joints in between the pavers got filled with high quality polymeric

Long Island Gunite Swimming Pool Company 20×40 Gunite swimming pool and spa, built separate and sharing same equipment, including filters and heater. Both spa and pool were finished with onyx diamond brite and gray porcelain tile trim. The backyard design incorporates a pool house and glass railings to separate it from the rest of the

Suffolk County 27543-H1 9-10-99 to present, 15435-H1 7-1-88 to 7-1-97  Nassau County H2209100000  Southampton L002384  NYC and The Five Boroughs 1321423

TOP
Visit Us On FacebookVisit Us On LinkedinVisit Us On TwitterVisit Us On Google Plus