Do you need to pressure wash pavers before sealing them?

Do you need to pressure wash pavers before sealing them?Yes! All concrete and paver surfaces should be cleaned before applying any sealer coating. It is very important that the surface is clean because any stains or materials that get trapped under the sealer will not be able to be cleaned after it’s sealed. Pressure washing pavers is just as important as sealing it.
Using the wrong pressure washing tools could also hurt the pavers. A pressure washer with the wrong nozzle could mark or wear the pavers. The best recommended tool is a high volume, low pressure, hot water pressure washer. The hot water cleans the pavers and prepares the surface for the best result sealing job.

Long Island Paver Cleaning and Sealing Company

Is it necessary to seal pavers and why

Best Long Island Paver Restoration CompanyIs it necessary to seal pavers and why

Yes! Concrete pavers should be sealed. Paving stones are manufactured with the highest quality cement, but cement is a corrosive material that wears under natural elements.
The sun, rain and cold, can easily wear the surface of pavers, and a good sealing job with the right sealing product, applied by a professional technician of sealing, will create a layer of protection over the paving stones making them water repellent and weather proof. This will protect the concrete surface from corrosion.
A good sealer penetrates the paver surface and stays there for many years, even if the look of the sealer goes away, the color and texture of the pavers will stay new.

 

Paving Stone Cleaning & Sealer Company Long Island NY

Schedule an Appointment with a Gappsi Representative.Paving Stone Cleaning & Sealer Company Long Island NY

Paving stone driveway installed by Gappsi in 2008, got refurbished with the cleaning and sealing process. Using low pressure hot water the pavers surface gets clean uniformly with no impact of wear on the stone surface. The joints in between the pavers got filled with high quality polymeric sand and vibrated with heavy mechanical plate compactor with rubber rolling system to prevent pavers from getting scratched or damaged. To learn more about Gappsi products, please contact us at 631-543-1177 or visit our web site at www.gappsi.com

Gunite Swimming Pool With safety Auto-cover Nassau County NY

Nassau County Gunite Swimming Pool Company

Gunite pool built indoor, with safety auto cover to help minimize the amount of steam rising from the heated water in to the room. Gappsi constructed the swimming pool and the room addition for this residence in Nassau Long island NY. The coping and patio installed were Cambridge Ledgestone in onyx and gray blend. The interior finish of the swimming pool was a 6 inches tile bend around the top perimeter and tile markers on the step edges and white marble dust finish. To learn more about Gappsi products, please contact us at 631-543-1177 or visit our web site at www.gappsi.com
[wpvideo ezovyCf7]