Selecting the right color is one of the most important steps in any decorative concrete project. Our wide range of color selection guides and color charts.
Color Chart of the twenty colored concrete dyes (click on this image to enlarge). The colors listed are only a representation of the Concrete Dyes. Changes in concrete slab colors will affect the appearance of the dye, therefore, actual colors may vary.
Apply using a brush, medium nap roller or low-pressure sprayer at any temperature between 40-80°F. Prior to treatment, the surface does not need any special treatment but it must be water, oil, and dust free to allow proper penetration of the sealer. Check the surface of your concrete before applying this sealer to make sure it absorbs drops of water within 20-30 seconds. If it beads up then use Eco Concrete Etcher prior to applying this sealer. The coverage rate is approximately 200 to 400 sf/gal/app depending on the concrete porosity. Apply two coats 2 to 4 hours apart rather than one thick coat. Allow curing for 24 to 48 hours without rain.