This backyard was designed by Giuseppe Abbrancati and installed by Gappsi in Babylon, Long Island NY. The layout incorporates a lower patio, a fire pit area with a sitting wall, and a bar area with a pergola built over it. This provides shade from the sun and accents the sitting area and the bar island. The upper patio is one step down from the backyard sliding doors, making it very easy and comfortable walking out into the backyard. A flowerbed defines the edge of the patio allowing room for flowers and a birdbath fountain. The main use of the raised patio is to accommodate the main large dining table and the cooking island for the grill and other outdoor appliances. Manufactured retaining walls were used to create the elevations and structure for the steps, columns, sitting walls, cooking island, and bar island. The floors were paved with ivory travertine, containing a color scheme of browns, beige, and white colors, to ornate this detailed and functional backyard setting.
Long Island Backyard Designers – Naturals Travertine Supplier – Masonry Installers
Mesh covers are the most common way to safeguard your pool during the winter. A winter cover has to be strong and made of good quality material. There are many manufactures of pool liners and mesh safety covers, and mesh covers can be ordered according to the initial pool liner measurements. Gappsi can supply and install a mesh pool cover, we are authorized dealers and installers for every brand, from Loop-Loc, Merlin, Lathem, Vynall and many other others. Manufactures make many grades of covers, the better the grade the more expensive to cover is. Tight thin mesh and strong fibers used to manufacture the covers will give your pool cover the quality to last for many years. Swimming pool winter covers installed by Gappsi will give you all the protection, security, and safety you need for your family, pets, and neighbors. Winter pool covers are manufactured to let the water from the rain drain through. Also, it allows you to put your pump in the middle of the cover and allow the extra water in the pool to come through and get pumped out. Winter covers are manufactured in all mesh or solid rubber with a 24×24 mesh hole in the center to let water drain into the pool. Anchors are installed in the patio about 36 inches away from the swimming pool. The way they are installed is by drilling a hole in the patio, brass anchors are slid through, and the cover is then attached to the anchors. If the patio is not installed correctly, the cover may become loose and it will not be as safe as it should be. The Gappsi way of installation starts with the proper installation of the patio. Four foot wide slabs with reinforced rebar are always installed around the swimming pool to prevent settling of the patio, then the finished paving material is installed over the concrete base. The Gappsi installation of the safety pool cover is then installed over the patio by drilling holes straight through the finished paving material all the way down into the concrete base. A sleeve is installed into the hole about 6 inches into the patio going through the 4 inches of concrete base and further in the ground, and a brass screw pin is then installed into the pipe. By unscrewing the brass screw pin; it comes up above the patio and allows for the cover ring hooks to attach to the brass screw. After this is all done for every strap of the cover, your Gappsi installed pool cover is safe to walk on with no chance of breaking.
This swimming pool was built by Gappsi in Old Westbury, NY 11545.