Epoxy Floors Design and Installation Long Island NY

Epoxy Floors Design and Installation Long Island NYEpoxy Floors

Epoxy floors have become very popular in the past decade. The versatility of the material is unmatched by any other product. There is an unbelievable variety in color, and the finishes vary from rustic-working-garage type flooring finishes, to elegant marbleized hotel lobbies or residential homes. Gappsi provides epoxy floors solutions to all residents on Long Island for both Nassau and Suffolk Counties in NY.  Get  your epoxy products installed by a reputable company.

Installation Process

In this basement we removed asbestos tiles that were glued down with liquid asphalt. The concrete floor was then grinded down to remove the tar and prepare the surface for the installation of the vapor barrier coating. Right after the first application of epoxy yellow vinyl, flakes were thrown widely in the wet epoxy and were left to stick and dry for the next 24 hours. The next step was to vacuum the loose vinyl flakes off the floor and lightly scrape the floor to flatten the surface. The final step was to apply a clear coat of the epoxy over the vinyl flakes. This gives the floor a smooth finish and covering the flakes prevents them from getting ripped off the floor. In this basement we did not apply any hardener coat over the epoxy because the floor is not used for vehicular traffic. In a garage floor or any vehicular trafficked area, a layer of urethane would need to be applied to harden the surface of the epoxy finish. This last process prolongs the wearing of the floor and also protects it from any UV light coming through the window and doors. Gappsi provides Epoxy floors solutions to all residents on Long Island for both Nassau and Suffolk County NY.

Epoxy Floors installer Serving Nassau & Suffolk County Long Island NY

Share this page:

Back Yard Designed by Giuseppe Abbrancati and Built by Gappsi in Dix Hills NY

Back Yard Designed by Giuseppe Abbrancati and Built by Gappsi in Dix Hills NYPool house pavilion/garage combination built in Dix Hills, NY with cedar shake shingles impression vinyl siding and 30 year architectural brown shingles. Part of the structure has a garage door to the driveway and an overhanging pavilion facing the pool and backyard. The garage was built with extra height to accommodate a car lift. Trim and columns were finished with Azek, masonry piers and BBQ island, with a grill refrigerator and bar sink, constructed with Moca travertine veneers. The large free form swimming pool was built with concrete walls and a liner, a shallow deep end to accommodate the SRS Slide, 3 sheer descents built in the raised wall on the back side of the pool, concrete steps covered with a textured liner, a deep end bench, a standing ledge, an LED light, gas heater, salt water chlorine system, and full automation. Approximately 3,000 sq ft of Moca travertine pavers were used for the entire backyard, and the deck leading to the house was constructed with Timbertech. To learn more about Gappsi Products please follow our blog Gappsi.com/blog

Masonry Designer Contractor Dix Hills Long Island NY

Share this page: