Safety Mesh Winter Pool Covers – Installers & Specialists – Long Island, NY

Safety Mesh Winter Pool Covers - Installers & Specialists - Long Island, NYMesh covers are the most common way to safeguard your pool during the winter. A winter cover has to be strong and made of good quality material. There are many manufactures of pool liners and mesh safety covers, and mesh covers can be ordered according to the initial pool liner measurements.
Gappsi can supply and install a mesh pool cover, we are authorized dealers and installers for every brand, from Loop-Loc, Merlin, Lathem, Vynall and many other others.
Manufactures make many grades of covers, the better the grade the more expensive to cover is. Tight thin mesh and strong fibers used to manufacture the covers will give your pool cover the quality to last for many years.
Swimming pool winter covers installed by Gappsi will give you all the protection, security, and safety you need for your family, pets, and neighbors. Winter pool covers are manufactured to let the water from the rain drain through. Also, it allows you to put your pump in the middle of the cover and allow the extra water in the pool to come through and get pumped out. Winter covers are manufactured in all mesh or solid rubber with a 24×24 mesh hole in the center to let water drain into the pool. Anchors are installed in the patio about 36 inches away from the swimming pool. The way they are installed is by drilling a hole in the patio, brass anchors are slid through, and the cover is then attached to the anchors. If the patio is not installed correctly, the cover may become loose and it will not be as safe as it should be.
The Gappsi way of installation starts with the proper installation of the patio. Four foot wide slabs with reinforced rebar are always installed around the swimming pool to prevent settling of the patio, then the finished paving material is installed over the concrete base. The Gappsi installation of the safety pool cover is then installed over the patio by drilling holes straight through the finished paving material all the way down into the concrete base. A sleeve is installed into the hole about 6 inches into the patio going through the 4 inches of concrete base and further in the ground, and a brass screw pin is then installed into the pipe. By unscrewing the brass screw pin; it comes up above the patio and allows for the cover ring hooks to attach to the brass screw. After this is all done for every strap of the cover, your Gappsi installed pool cover is safe to walk on with no chance of breaking.

Winter Safety Mesh Covers Installer companies Long Island

Share this page:

How often do pavers need to be resealed?

How often do pavers need to be resealed?It is important to wait at least a year before sealing concrete pavers from the date of installation. Concrete pavers have to cure and must go through a four-season cycle of weathering. This allows most of the lime from the paver’s surface to come out. After the cleaning and pressure washing process, all the lime from the surface gets removed and the color of the stones gets exposed, this allows the sealer to capture the best of the pavers and preserve it that way. The life of the sealer is contingent to how well it has been applied. Three to five years is recommended by most sealer manufactures, and usually people reseal the driveway and pavers that often. But what’s most important is that pavers are sealed right one time and even though the sheen will go away, or some dust my sit on the surface, the sealer that penetrated the surface of the pavers has created that will be present for many years preventing the pavers from edging.

Long Island Best Sealing Products for Paving Stones

Share this page:

What is the best sealer for concrete pavers?

What is the best sealer for concrete pavers?There are many manufactures of sealers, from solvents to acrylic urethane. Epoxies, acrylic, and urethane sealers come in water-based versions and solvent-based versions, including combinations of both. The biggest difference between the two is the VOC content. The sheen and life of the product determines how often it lasts before needing to be reapplied. Solvent-based acrylics tend yellow overtime and don’t allow the concrete breathe. Epoxies are the strongest sealers, but are best used for smoother surfaces and more for indoor or warehouse floor application. The best sealers for paving stones are water-based urethane. They are algae and mold inhibitors, allow superior joint stabilization, they are environmentally safe, its UV Protection will not harm vegetation, and it is VOC Compliant in all 50 States. Well-trained Gappsi personnel can apply paving stone sealer products achieving the best results.

Cleaning and Sealing Expert Company Long Island

Share this page: