FOLLOW US: 
Cleaning and sealing limestone driveway pavers in Roslyn NY. Stones were pressure washed and joints filled with polymeric sand, vibrated wit rolling vibratory plates. Gappsi Exclusive sealer was applied to expose the color and details of the limestone pavers surface.
Nassau County Long Island NY Stone Patios and Driveways Cleaning and Sealing Company
Backyard pool patio installed by Gappsi in Westbury NY with natural stone pavers. Scogli di mare limestone pool coping, 6×9 Melfi limestone random pattern and inlays of 6×9 scogli di mare pavers. Stoop and cocking island veneer were veneered with Fiorito travertine. The all pool and house patio were cleaned with hot water low pressure washing, joints were filled with haze free polymeric sand and sealed with urethane sealer.
Polymeric sand is best to use to fill the joints in between pavers. High quality polymeric sand will not leave any stains on the surface. Gappsi vibrates the pavers while sweeping which allows the send to fill the joints tight and also help the sand harden. Sweeping the excess sand off the pavers before wetting the sand is also very important. This prevents the glue that is in the sand to smear the pavers surface. Most importantly, applying a good urethane sealer will further help the sand to harden and prevent ants from digging into the paver joints and weeds from growing on patios.
Schedule an Appointment with a Gappsi Representative.
Paving stone driveway installed by Gappsi in 2008, got refurbished with the cleaning and sealing process. Using low pressure hot water the pavers surface gets clean uniformly with no impact of wear on the stone surface. The joints in between the pavers got filled with high quality polymeric sand and vibrated with heavy mechanical plate compactor with rubber rolling system to prevent pavers from getting scratched or damaged. To learn more about Gappsi products, please contact us at 631-543-1177 or visit our web site at www.gappsi.com
This driveway was constructed with a 10 inch RCA base and granite pavers were installed on one inch of fine sand. The paving stone sizes were 6”x 9”, with a flamed and tumbled texture finish. These granite pavers are 1-1/4” thick and can be used for pedestrian and vehicular trafficked areas. The joints in between the pavers were filled with polymeric sand, then compacted with a mechanical vibratory plate and sealed. To learn more about Gappsi products, please contact us at 631-543-1177 or visit our web site at www.gappsi.com