Cooking Island and raised bar was Designed and built by Gappsi in Dix Hills NY. The semi-circle design of these out door kitchen incorporates many appliances, from the bar sink, grill, smoker, oven, refrigerator and a breakfast station and many access doors for storage areas. Walls were constructed of steel studs and cement blocks and then veneered with Fiorito travertine. The counter tops were made out of polished Brazilian granite and floor in between the 2 island are travertine French pattern Moca. All appliances are Twin Eagle also supplied by Gappsi. To learn more about Gappsi products, please contact us at 631-543-1177 or visit our web site at www.gappsi.com
This driveway was constructed with a 10 inch RCA base and granite pavers were installed on one inch of fine sand. The paving stone sizes were 6”x 9”, with a flamed and tumbled texture finish. These granite pavers are 1-1/4” thick and can be used for pedestrian and vehicular trafficked areas. The joints in between the pavers were filled with polymeric sand, then compacted with a mechanical vibratory plate and sealed. To learn more about Gappsi products, please contact us at 631-543-1177 or visit our web site at www.gappsi.com
This fire pit was built with cinder block and veneered with Eldorado cultured stones. A U-Shaped sitting wall with two end columns were also installed around the fire pit. Blue stone double-sided rock faced coping were installed to complete the top of the fire pit, the walls, and columns. The columns also serve as pedestal for accent lighting, and the colors of the noce travertine for the pool patio and coping were a perfect contrast to make the fire pit area stand out.