Burying PVC pipes under paver as slivers for future electrical or sprinkle system use
By Giuseppe Abbrancati
Burying pvc pipes under paver as slivers for future electrical or sprinkle system use
It is recommended to install pvc pipes under a walkway or driveway for future access to run sprinkle system pipes or outdoor lighting wires. Before installing the base material such as crushed concrete crushed bluestone or poured concrete base. Pvc pipes should be berried across then the base should be installed .it is best if any slivers is installed on line with a window or something that can be used as e referring point to be able to find it in the future. Also a map with measurements could be helpful to find them but the best way to mark where the slivers are berried is by making a simple cut to the edge of the paving stone installed in the border. This will allow you to find them even after many years.