Basketball court and hoop installed in Commack by Gappsi, this court was installed on an existing asphalt court with a nicolock mini colonial wall installed as a sitting wall and steps
Epoxy Floors Applicators East-Northport Long Island NY
Epoxy Floors Applicators East-Northport Long Island NY.Epoxy Floors Installers Experts This epoxy floor was installed in a private residence in East Northport long island NY The product applied was Purepoxy products EZ Concrete Supply NY.
First step was the grinding of the floor, to remove the existing asbestos tiles and the asphalt tar used to glue them to the concrete, special diamond blade capable of removing paint and scarifying the concrete to create a textured evenly and abrasive ready for the epoxy VRM Vapor reduction * PE -100 pigmented Tan membrane to stick to it.
Saddle Tan Colored Chips Broadcasted in to the epoxy Base while wet and then let is dry for 24 hours. After the epoxy is cured the access vinyl flakes were removed and floor vacuumed. A final coat of PE-100 Clear Top Coated the flakes totally covering them and giving the floor a very smooth texture finish.
Normally a coat of urethane finish is applied to further hardening the epoxy finish and also protect it from UV lights , mostly in vehicular trafficated areas, but in this case being in a basement there is no need to apply urethane because the floor in only used for kids playground and laundry room.
Best Epoxy Floors Applicators and Experts, Epoxy Floors Applicators East-Northport Long Island NY
Shuffleboard Courts Designer Installer Company Long Island NY.
Custom Shuffleboard Court built in Manorville NY.Granite Driveway and Masonry Installation, Dix Hills NY 11746, by Gappsi
The driveway installation started with the excavation of existing asphalt and sub base. New concrete base with fiber mesh was installed with Amagansett granite pavers is laid over a thin layer of graded sand. Stone was selected from the Gappsi natural stone collection. Jumbo Belgian block was installed for the street curb and driveway entrance. The sealing process begins with pressure washing the entire patio, removing all dirt/debris from the stone surface and in between the joints. Next, Nexgel Techniseal synthetic sand is applied in between the pavers joints and vibrated with a mechanical plate compactor. The plate compactor has rubber rollers to prevent the stones from cracking or scratching. This vibrating process allows the sand to fall in between the joints and density. Then, we clean the pavers with brooms and landscape blowers, to clean the excess sand from the pavers surface and to evenly spread the sand in between the pavers joints. The next step is to wash the pavers by misting water to penetrate the synthetic sand into the paver joints all the way down below the pavers. The sand and water activate a chemical reaction of the pollen that’s in the sand to cause the sand to harden. Finally, the application of the sealer, two parts components urethane dealer, specially formulated for Gappsi, is applied to the pavers surface and the sand joints to prevent stones from staining, extend their life cycle and further enhance their texture, color, and surface. From design concept to finish execution Gappsi provides natural stone supply/installation, Cleaning and sealing services. For more information about design and installation in Dix Hills NY, visit www.gappsi.com or call us at 631-543-1177 for a free estimate.