Gappsi provides masonry construction in Setauket, NY and all of Long Island. This outdoor cooking island was constructed with cement block walls and veneered with natural stones. The counter top is tan brown granite, the twin eagle grill is in the center and the sitting areas are on both sides. The right side is in the shape of a circle as a table can sit several chairs around it; the left side has a two-level area with a higher back for taller stools, the bar area matching the sitting wall was built around the main table with light piers on each side, and it was capped with rock-faced bluestones. The patio pavers installed are tumbled Nicolock village pavers in Adobe Blend and the paver joints are filled with polymeric sand and sealed.
Follow Gappsi and click here to get updates on latest projects.
Pavilion Designer Contractor Huntington NY
Pavilion built in Dix Hills/Huntington Station NY by Gappsi. A complete outdoor living area covered under an elegant pavilion that incorporates a fireplace with a tv, a bar area, and a sitting area. Fiorito Travertine wall veneers and Moca French pattern travertine pavers were used for the floor. Stone piers are built to support the Azek columns and all trim and molding work were also done with Azek.
Pavilion Designer Carpentry Contractor Huntington NY
Pond Less Waterfall Designers Contractor Nesconset Long island NY
Pond-less waterfall built with Long Island boulders, New York bluestone for spillover, and 2 inches of gravel for the pond. Pond-less water features are very low maintenance and safe for pets. The trickle down water hitting the rocks in the pond creates relaxing sounds using a minimum of water flow.
Landscape Water Feature Contractor Long Island NY
Custom Bar built with custom mahogany wood in MuttonTown Nassau county long island NY by Gappsi
Long Island Custom Carpentry CompanyGranite Driveway and Masonry Installation, Dix Hills NY 11746, by Gappsi
The driveway installation started with the excavation of existing asphalt and sub base. New concrete base with fiber mesh was installed with Amagansett granite pavers is laid over a thin layer of graded sand. Stone was selected from the Gappsi natural stone collection. Jumbo Belgian block was installed for the street curb and driveway entrance. The sealing process begins with pressure washing the entire patio, removing all dirt/debris from the stone surface and in between the joints. Next, Nexgel Techniseal synthetic sand is applied in between the pavers joints and vibrated with a mechanical plate compactor. The plate compactor has rubber rollers to prevent the stones from cracking or scratching. This vibrating process allows the sand to fall in between the joints and density. Then, we clean the pavers with brooms and landscape blowers, to clean the excess sand from the pavers surface and to evenly spread the sand in between the pavers joints. The next step is to wash the pavers by misting water to penetrate the synthetic sand into the paver joints all the way down below the pavers. The sand and water activate a chemical reaction of the pollen that’s in the sand to cause the sand to harden. Finally, the application of the sealer, two parts components urethane dealer, specially formulated for Gappsi, is applied to the pavers surface and the sand joints to prevent stones from staining, extend their life cycle and further enhance their texture, color, and surface. From design concept to finish execution Gappsi provides natural stone supply/installation, Cleaning and sealing services. For more information about design and installation in Dix Hills NY, visit www.gappsi.com or call us at 631-543-1177 for a free estimate.