Epoxy Floors Applicators East-Northport Long Island NY

Epoxy Floors Applicators East-Northport Long Island NY.Epoxy Floors Installers Experts This epoxy floor was installed in a private residence in East Northport long island NY The product applied was Purepoxy products EZ Concrete Supply NY.

Epoxy Floors Applicators East-Northport Long Island NYFirst step was the grinding of the floor, to remove the existing asbestos tiles and the asphalt tar used to glue them to the concrete, special diamond blade  capable of removing paint and scarifying the concrete to create a textured evenly and abrasive ready for the epoxy VRM Vapor reduction * PE -100 pigmented Tan membrane to stick to it.
Saddle Tan Colored Chips Broadcasted in to the epoxy Base while wet and then let is dry for 24 hours. After the epoxy is cured the access vinyl flakes were removed and floor vacuumed. A final coat of PE-100 Clear Top Coated the flakes totally covering them and giving the floor a very smooth texture finish.
Normally a coat of urethane finish is applied to further hardening the epoxy finish and also protect it from UV lights , mostly in vehicular trafficated areas, but in this case being in a basement there is no need to apply urethane because the floor in only used for kids playground and laundry room.

Best Epoxy Floors Applicators and Experts, Epoxy Floors Applicators East-Northport Long Island NY
Share this page:

Safety Mesh Winter Pool Covers – Installers & Specialists – Long Island, NY

Safety Mesh Winter Pool Covers - Installers & Specialists - Long Island, NYMesh covers are the most common way to safeguard your pool during the winter. A winter cover has to be strong and made of good quality material. There are many manufactures of pool liners and mesh safety covers, and mesh covers can be ordered according to the initial pool liner measurements.
Gappsi can supply and install a mesh pool cover, we are authorized dealers and installers for every brand, from Loop-Loc, Merlin, Lathem, Vynall and many other others.
Manufactures make many grades of covers, the better the grade the more expensive to cover is. Tight thin mesh and strong fibers used to manufacture the covers will give your pool cover the quality to last for many years.
Swimming pool winter covers installed by Gappsi will give you all the protection, security, and safety you need for your family, pets, and neighbors. Winter pool covers are manufactured to let the water from the rain drain through. Also, it allows you to put your pump in the middle of the cover and allow the extra water in the pool to come through and get pumped out. Winter covers are manufactured in all mesh or solid rubber with a 24×24 mesh hole in the center to let water drain into the pool. Anchors are installed in the patio about 36 inches away from the swimming pool. The way they are installed is by drilling a hole in the patio, brass anchors are slid through, and the cover is then attached to the anchors. If the patio is not installed correctly, the cover may become loose and it will not be as safe as it should be.
The Gappsi way of installation starts with the proper installation of the patio. Four foot wide slabs with reinforced rebar are always installed around the swimming pool to prevent settling of the patio, then the finished paving material is installed over the concrete base. The Gappsi installation of the safety pool cover is then installed over the patio by drilling holes straight through the finished paving material all the way down into the concrete base. A sleeve is installed into the hole about 6 inches into the patio going through the 4 inches of concrete base and further in the ground, and a brass screw pin is then installed into the pipe. By unscrewing the brass screw pin; it comes up above the patio and allows for the cover ring hooks to attach to the brass screw. After this is all done for every strap of the cover, your Gappsi installed pool cover is safe to walk on with no chance of breaking.

Winter Safety Mesh Covers Installer companies Long Island

Share this page: