Porphyry Pavers and Copings installed in Massapequa Park NY 11762.
The project was designed by Giuseppe Abbrancati and installation was done by Gappsi professionals. This small backyard space was utilized to fit a swimming pool, patio, and cooking island. The swimming pool comes with many amenities along with porphyry patio and coping. A 28 x 28 x 14 L shaped vinyl lined swimming pool was built with many options, including LED lights, a gas heater, a chlorine salt generator, and stadium stairs across the 14 ft wide shallow area. The swimming pool was built with concrete walls and built 4 ft deep throughout the entire pool due to the high water table. Porphyry pavers and copings installed in this project, primarily contain gray colors with gold and rusty colored veins finished in a sandblasted and tumbled process. The texture and edges are very comfortable and timeless in look. They are manufactured in India in a French Pattern design. Installation was done on one inch of clean sand over four inches of poured concrete base and compacted sub base. The veneers for the cooking island are Nantucket Eldorado stacked stone, manufactured in 2 ft long panels. Custom-made corners and the yellow polished granite top for the cooking island is contrasted with the colors of the walls and the patio. All Twin Eagle appliances including a 42 inch grill, a bar sink, a garbage pail cabinet, storage cabinets, and door.
By visiting the Gappsi Showroom display, you will find a large selection of porphyry pavers in many sizes and patterns imported from all over the world. Over the years, Gappsi has imported many porphyry pavers and copings and had specific products exclusively made for Gappsi that we have installed on many award winning projects throughout Long Island in both Nassau and Suffolk County. We have extended our connections with distributors and have accessed a wider selection to our porphyry pavers and coping products, including many sizes of veneers and tiles. For more information about Gappsi porphyry pavers and copings, please contact us at 631-543-1177 or visit our website at Gappsi.com.
Travertine pavers and coping are manufactured in many sizes and textures. The most common pattern used is the French pattern, also called Marseilles and Opus Romano pattern. In this project, located in Merrick, NY, approximately 2,000 sq ft of patio was installed using Moca travertine selected from the Gappsi showroom. The colors variations of the Moca travertine consist of beige, browns, and white. Travertine pavers and coping have become very popular in the last decade within the New York area. Consumers and contractors have accepted and learned from using it, because it can withstand the cold weather in the region. A small vinyl pool was also installed in this backyard. Four deck jets are installed along one side of the pool, and the swimming pool also contains a heater, a salt chlorine system, and LED lights. The pool coping consists of 2 inch thick travertine custom made for Gappsi in randomly mixed lengths. A sitting wall was built all around the backyard perimeter, adding a finished look to the evergreen trees planted behind it. It is veneered with Nantucket Eldorado stones and travertine coping to match the swimming pool. The backyard sliding door semi circular steps are built also called wedding cake steps and finished with Travertine pavers and coping. The front walkway from the driveway is built with 24 x 24 inch, 2 inch thick, stepping stones. Travertine pavers and coping come with surface holes and imperfections due to the natural creation of the travertine, as a build up of lime in shallow body of water that took place over millions of years, also the colors of the Travertine pavers and coping are naturally embedded in the stone structure.
If you are looking for Travertine pavers and coping suppliers, or a showroom where you can see these products displayed, you may visit the Gappsi natural stone selection at 1015 West Jericho Turnpike in Smithtown NY 11787. Gappsi can provide you with all these services including free 3D designs.
Marble pavers and copings installed in Northport NY 11768.The project was designed by Giuseppe Abbrancati and installation was done by Gappsi professionals. This upscale project includes a very classy and comfortable pool house with many amenities along with marble pavers and copings for inside the pool house floor and window sills. A 25 x 45 vinyl lined swimming pool was built with many options, including a safety auto-cover and a custom built 6 x 9 spill over spa, four LED deck laminar jets, LED lights, a double propane heater with heat pump, chlorine salt generator, full automation, double in-wall ladder, stadium stairs across the shallow area, and a gray fiberglass diving board with fly deck bottom. Marble pavers and copings were also installed surrounding the swimming pool and the entire house patio. Marble pavers and copings installed in this area primarily contain gray colors with gold veins finished in a sandblasted and tumbled process. The texture and edges are very conformable and timeless in look. They are manufactured in Brazil in a french pattern design. Installation was done on one inch of clean sand over four inches of poured concrete base and compacted sub base. The veneers for pool house and spa walls are tumbled travertine ledge stone cut 2 inches high and manufactured with a bash backing in 2 ft long panels. Custom-made corners were also used throughout the installation. By visiting the Gappsi Showroom display, you will find a large selection of marble pavers in many sizes and patterns imported from all over the world. Over the years, Gappsi has imported many Marble pavers and copings and had specific products exclusively made for Gappsi that we have installed on many award winning projects throughout Long Island in both Nassau and Suffolk county. We have extended our connections with distributors and have accessed a wider selection to our Marble pavers and coping products, including many sizes of veneers and tiles. For more information about Gappsi Marble pavers and copings, please contact us at 631-543-1177 or visit our website at Gappsi.com.
This backyard layout includes a vinyl-lined swimming pool with fiberglass steps and a raised patio area next to the pool, which was built as a sundeck and also to include a sheer descent water feature installation. Also, we installed a wood burning fire-pit and sitting wall combination with travertine veneer and coping. The whole backyard patio and pool area was paved with Scabos french pattern travertine pavers and silver travertine coping.
Backyard Design And Installation provided by Gappsi, designed by Giuseppe Abbrancati in Kings Park, NY. Starting with the installation of a gunite swimming pool, travertine patio, and a pavilion with outdoor kitchen. This backyard received a complete transformation.
The old railroad tie retaining wall was removed and re-constructed with a poured reinforced-concrete wall. It was then veneered with tumbled travertine split-face veneers and finished on top with 12 inch wide, 2 inch thick travertine coping. Sheer descent water features were also installed in the wall over the center spilling into the pool.
If you looking for a contractor provides Backyard Design And Installation Gappsi is the company for you. The custom designed swimming pool has a roman end by the diving area, steps and a spa in the shallow area, and a sundeck with an LED water bubbler on the long side of the pool facing across the pool to the water feature. The bluestone coping installed for swimming pool and spa complement the porcelain tiles installed in the swimming pool water line. The tile markers outline the steps, benches, sundeck, and the spa interior. The finish of the pool is Super Blue Diamond Brite, which consists of a white quartz with speckle of blue.
Gappsi personal has a vast knowledge in Backyard Design And Installation, we designed and installed An outdoor kitchen with granite counter top overhanging the stool sitting area. All walls were veneered with split-face tumbled travertine and Twin-Eagle appliances were installed. The appliances include a 24-inch griddle, see-through refrigerator, bar sink, ice maker, a large burner, and many storage cabinets. A 16×16 pavilion was custom-built over the outdoor cooking area, completed with stained wood beams in the ceiling and all synthetic wood trims wrapping the four columns and fascia.
The entire backyard floor and pool patio was completed with Moca tumbled french pattern travertine. The outdoor lighting is designed and installed to uniformly light up the backyard and accent each area. And a free-standing gas fire pit is also placed within the couch area facing the pool. for all you Backyard Design And Installation needs please contact Gappsi at 643-543-1177
This limestone patio and pool coping was designed and installed by Gappsi in Centerport, Long Island NY. A combination of roman pattern and smaller set random design pattern, fills the patio area. This is all surrounded by 6×9 outside borders and 2 inch random sized pool coping, with a natural-finished surface and a tumbled split rock-faced front.
Installation was done on 4 inches of poured concrete base and one inch of fine sand. The joints between the limestone pavers were filled with beige polymeric sand.
The color variation of this limestone varies containing browns, grays, greens, beige, and maroon colors. They are natural colors that blend in with any surrounding landscape.
This swimming pool, backyard patio, and the house exterior renovation were designed by Giuseppe Abbrancati and installed by the Gappsi team. We decided to use 24×24 porcelain pavers. Porcelain pavers are very durable and require no maintenance; they are also very precise in size and thickness. Their color variations are also very consistent and the texture is very comfortable to walk on. The home owner wanted a modern and clean look, with a stucco finish for the exterior walls and a simple stack bond pattern for the patio. The colors were a perfect blend of light beige and the pool coping was made of sandblasted marble pavers. This highlighted the pool shape and also matched the white trim of the house.
This project also included the total renovation of the swimming pool. Starting with a liner change, an all new re-plumbing of skimmers and jets, a new light, a new filter pump, and a new heater. We also added an automation system with ozone and a salt-chlorine generator. The pool patio was made of old clay pavers and the pool wall were made of steel panels. We tied ½ inch rebar to the walls all around the pool and poured 4 inches of 3500 PSI concrete with fiber mesh mixed in it.
Throw Back Time 1997
Award Presented To Giuseppe Abbrancati Gappsi, Upscale project built in Islip, NY uses 60mm Roma I and Roma II stones, both with rounded edges, plus 6-inch square Rustico pavers. The stones are placed in a running bond pattern, beginning at the driveway apron and continuing around each circle. This creates the illusions of changing lines of eight circles that lead to the grand, courtyard circle of a neo-classical, two-level home. Charcoal Rustico stones are used as inserts to enhance flowing lines of the driveway and outline the courtyard, while fans are added between circles to give the driveway a scalloped border. The home’s backyard patio and pool deck incorporate the Roma stone profiles with larger Coral Roma I and Corso stones, combining fan and herringbone and running bond patterns
Throw Back Time 1998
Award Presented To: Giuseppe Abbrancati Gappsi
The water in this faux pool is hard enough to support people who wish to get a view of the softer water just yards away. Adjacent to a catering hall, the roof plaza deck is a subtle metaphor: hold a great pool party without getting wet. The illusion of the water’s motion is cleverly introduced into the pattern, even in the whirlpool bath. The pavers rest on a thin layer of bedding sand over a waterproof membrane. Paving stones were custom colored and manufactured by Nicolock
project Location: Huntington, Long island NY
Throw Back Time 1995
Award Presented To: Gappsi 1995 Location: West Islip, NY
A circular designs incorporated at the front entrance of this residence is used as a focal point and blends with flowing lines of pavestones. Pavers are 60mm thick, placed on top of a 10-in. sub base. A 4,500 square foot circular driveway was installed on 1-inch sand in a running bond pattern using lines of Charcoal Roma variations to enhance the layout