Mesh covers are the most common way to safeguard your pool during the winter. A winter cover has to be strong and made of good quality material. There are many manufactures of pool liners and mesh safety covers, and mesh covers can be ordered according to the initial pool liner measurements.
Gappsi can supply and install a mesh pool cover, we are authorized dealers and installers for every brand, from Loop-Loc, Merlin, Lathem, Vynall and many other others.
Manufactures make many grades of covers, the better the grade the more expensive to cover is. Tight thin mesh and strong fibers used to manufacture the covers will give your pool cover the quality to last for many years.
Swimming pool winter covers installed by Gappsi will give you all the protection, security, and safety you need for your family, pets, and neighbors. Winter pool covers are manufactured to let the water from the rain drain through. Also, it allows you to put your pump in the middle of the cover and allow the extra water in the pool to come through and get pumped out. Winter covers are manufactured in all mesh or solid rubber with a 24×24 mesh hole in the center to let water drain into the pool. Anchors are installed in the patio about 36 inches away from the swimming pool. The way they are installed is by drilling a hole in the patio, brass anchors are slid through, and the cover is then attached to the anchors. If the patio is not installed correctly, the cover may become loose and it will not be as safe as it should be.
The Gappsi way of installation starts with the proper installation of the patio. Four foot wide slabs with reinforced rebar are always installed around the swimming pool to prevent settling of the patio, then the finished paving material is installed over the concrete base. The Gappsi installation of the safety pool cover is then installed over the patio by drilling holes straight through the finished paving material all the way down into the concrete base. A sleeve is installed into the hole about 6 inches into the patio going through the 4 inches of concrete base and further in the ground, and a brass screw pin is then installed into the pipe. By unscrewing the brass screw pin; it comes up above the patio and allows for the cover ring hooks to attach to the brass screw. After this is all done for every strap of the cover, your Gappsi installed pool cover is safe to walk on with no chance of breaking.
Bocce ball courts designed and built by Gappsi in East Northport, NY
This deluxe bocce ball court was built by Gappsi with pressure treated lumber, lined with synthetic turf and, finished with white silica sand. Custom engraved set of bocce balls are gifted to our customers for each bocce ball court built. Gappsi provides sports courts design and installation for all residential and commercial properties in both Nassau and Suffolk County on Long Island.
Bocce Ball Designer – Contractor Long Island NY
Bocce Ball Court Installer Company Nassau County NY
Bocce Ball court built with pressure treated lumber side walls and synthetic turf floor Nassau Long island NY by Gappsi.Paving Stone Cleaning & Sealer Company Woodbury Long Island NY
Swimming pool and Retaining wall Built by Gappsi in Woodbury NY, with Travertine patio and coping. Refurbished with the cleaning and sealing process. Using low pressure hot water the paver’s surface gets clean uniformly with no impact of wear on the stone surface. The joints in between the pavers got filled with high quality polymeric sand and vibrated with heavy mechanical plate compactor with rubber rolling system to prevent pavers from getting scratched or damaged. Then sealed with high quality urethane sealer To learn more about Gappsi products, please contact us at 631-543-1177 or visit our web site at www.gappsi.com
Swimming Pool Contractor Woodbury NY
Nassau county Long island NY Paving Stone Cleaning and Sealing Company
Cleaning and sealing limestone driveway pavers in Roslyn NY. Stones were pressure washed and joints filled with polymeric sand, vibrated wit rolling vibratory plates. Gappsi Exclusive sealer was applied to expose the color and details of the limestone pavers surface.
Nassau County Long Island NY Stone Patios and Driveways Cleaning and Sealing Company
Backyard Pool Patio Contractor Westbury Long Island NY
Backyard pool patio installed by Gappsi in Westbury NY with natural stone pavers. Scogli di mare limestone pool coping, 6×9 Melfi limestone random pattern and inlays of 6×9 scogli di mare pavers. Stoop and cocking island veneer were veneered with Fiorito travertine. The all pool and house patio were cleaned with hot water low pressure washing, joints were filled with haze free polymeric sand and sealed with urethane sealer.
Boccie Ball Court Builder East Hampton NY
Bocce Ball court built in east Hampton NY with pressure treated lumber and then stained with mahogany color. The surface base of the court is crushed sea shells. The perfect setting of a bocce court in the middle of a vineyard.
Bocce Ball Designer – Contractor East Hampton NY
How often do pavers need to be resealed?
It is important to wait at least a year before sealing concrete pavers from the date of installation. Concrete pavers have to cure and must go through a four-season cycle of weathering. This allows most of the lime from the paver’s surface to come out. After the cleaning and pressure washing process, all the lime from the surface gets removed and the color of the stones gets exposed, this allows the sealer to capture the best of the pavers and preserve it that way. The life of the sealer is contingent to how well it has been applied. Three to five years is recommended by most sealer manufactures, and usually people reseal the driveway and pavers that often. But what’s most important is that pavers are sealed right one time and even though the sheen will go away, or some dust my sit on the surface, the sealer that penetrated the surface of the pavers has created that will be present for many years preventing the pavers from edging.
Long Island Best Sealing Products for Paving Stones
Do you need to pressure wash pavers before sealing them?
Yes! All concrete and paver surfaces should be cleaned before applying any sealer coating. It is very important that the surface is clean because any stains or materials that get trapped under the sealer will not be able to be cleaned after it’s sealed. Pressure washing pavers is just as important as sealing it.
Using the wrong pressure washing tools could also hurt the pavers. A pressure washer with the wrong nozzle could mark or wear the pavers. The best recommended tool is a high volume, low pressure, hot water pressure washer. The hot water cleans the pavers and prepares the surface for the best result sealing job.
Long Island Paver Cleaning and Sealing Company
Paving Stone Cleaning & Sealer Company Long Island NY
Schedule an Appointment with a Gappsi Representative.
Paving stone driveway installed by Gappsi in 2008, got refurbished with the cleaning and sealing process. Using low pressure hot water the pavers surface gets clean uniformly with no impact of wear on the stone surface. The joints in between the pavers got filled with high quality polymeric sand and vibrated with heavy mechanical plate compactor with rubber rolling system to prevent pavers from getting scratched or damaged. To learn more about Gappsi products, please contact us at 631-543-1177 or visit our web site at www.gappsi.com