Backyard and Gunite Swimming Pool Built in west Islip by Gappsi

West Islip NY Need a Landscape and Masonry Company. Gappsi Offers full Services from Design to Installation

Backyard and Gunite Swimming Pool Built in west Islip by GappsiThis backyard is designed and constructed by Gappsi in West Islip, Long island NY 11795. The layout incorporates a 18×36 gunite swimming pool rectangular shape. The swimming pool is only 6 feet deep and is a non-diving pool, thus a diving board cannot be installed. The steps are built along side the 18 foot long shallow area and it also has 2 benches in the deep end to exit the pool. The finish of the swimming pool is done with black-colored quartz dust. Two LED lights are installed on one side and the hydraulic system, consisting of two skimmers and 2 inch 40 schedule PVC [gravityform id=”1″ title=”true” description=”true”]plumbing.

Hayward equipment is installed including a gas heater, VS pump, cartridge filter, salt-chlorine generator, and an automation control panel. The swimming pool also has a safety auto cover and a mesh winter cover. The coping and patio consists of 2 inch thick, flamed Pennsylvania  bluestone for the pool coping, and 1 inch flagging for the remainder of the patio. On one side of the swimming pool, there is no patio and the grass comes up to the pool edge. There is also a pool cabana built and an outdoor cooking island. The landscaping, including flowers, grass, and trees. The pool and patio design is created to compliment the Hamptons-style home, finished with natural, weathered cedar shingles.
https://www.youtube.com/watch?v=HBQOKaWZM8whttps://www.youtube.com/watch?v=1365KeY27ig

Share this page:

Safety Mesh Winter Pool Covers – Installers & Specialists – Long Island, NY

Safety Mesh Winter Pool Covers - Installers & Specialists - Long Island, NYMesh covers are the most common way to safeguard your pool during the winter. A winter cover has to be strong and made of good quality material. There are many manufactures of pool liners and mesh safety covers, and mesh covers can be ordered according to the initial pool liner measurements.
Gappsi can supply and install a mesh pool cover, we are authorized dealers and installers for every brand, from Loop-Loc, Merlin, Lathem, Vynall and many other others.
Manufactures make many grades of covers, the better the grade the more expensive to cover is. Tight thin mesh and strong fibers used to manufacture the covers will give your pool cover the quality to last for many years.
Swimming pool winter covers installed by Gappsi will give you all the protection, security, and safety you need for your family, pets, and neighbors. Winter pool covers are manufactured to let the water from the rain drain through. Also, it allows you to put your pump in the middle of the cover and allow the extra water in the pool to come through and get pumped out. Winter covers are manufactured in all mesh or solid rubber with a 24×24 mesh hole in the center to let water drain into the pool. Anchors are installed in the patio about 36 inches away from the swimming pool. The way they are installed is by drilling a hole in the patio, brass anchors are slid through, and the cover is then attached to the anchors. If the patio is not installed correctly, the cover may become loose and it will not be as safe as it should be.
The Gappsi way of installation starts with the proper installation of the patio. Four foot wide slabs with reinforced rebar are always installed around the swimming pool to prevent settling of the patio, then the finished paving material is installed over the concrete base. The Gappsi installation of the safety pool cover is then installed over the patio by drilling holes straight through the finished paving material all the way down into the concrete base. A sleeve is installed into the hole about 6 inches into the patio going through the 4 inches of concrete base and further in the ground, and a brass screw pin is then installed into the pipe. By unscrewing the brass screw pin; it comes up above the patio and allows for the cover ring hooks to attach to the brass screw. After this is all done for every strap of the cover, your Gappsi installed pool cover is safe to walk on with no chance of breaking.

Winter Safety Mesh Covers Installer companies Long Island

Share this page:

Loop-Loc Cover Company – Suffolk and Nassau County Long Island, NY.

Loop-Loc Cover Company - Suffolk and Nassau County Long Island, NY.
Need a pool safety cover installed? Gappsi provides Loop-Loc and Merlin winter pool covers installation, along with pool closing and winterization. Free estimates to measure, and a fair price for installation. The anchors in the pool patio are pre-drilled with a core bit for a precise and clean result, and all covers are custom made for any pool shape.
Contact Gappsi at 631-543-1177 for any winter cover installation need.

Loop-Loc Cover Contractor Installer

Suffolk and Nassau County Long Island, NY.

Share this page: