Epoxy Floors Design and Installation Long Island NY

Epoxy Floors Design and Installation Long Island NYEpoxy Floors

Epoxy floors have become very popular in the past decade. The versatility of the material is unmatched by any other product. There is an unbelievable variety in color, and the finishes vary from rustic-working-garage type flooring finishes, to elegant marbleized hotel lobbies or residential homes. Gappsi provides epoxy floors solutions to all residents on Long Island for both Nassau and Suffolk Counties in NY.  Get  your epoxy products installed by a reputable company.

Installation Process

In this basement we removed asbestos tiles that were glued down with liquid asphalt. The concrete floor was then grinded down to remove the tar and prepare the surface for the installation of the vapor barrier coating. Right after the first application of epoxy yellow vinyl, flakes were thrown widely in the wet epoxy and were left to stick and dry for the next 24 hours. The next step was to vacuum the loose vinyl flakes off the floor and lightly scrape the floor to flatten the surface. The final step was to apply a clear coat of the epoxy over the vinyl flakes. This gives the floor a smooth finish and covering the flakes prevents them from getting ripped off the floor. In this basement we did not apply any hardener coat over the epoxy because the floor is not used for vehicular traffic. In a garage floor or any vehicular trafficked area, a layer of urethane would need to be applied to harden the surface of the epoxy finish. This last process prolongs the wearing of the floor and also protects it from any UV light coming through the window and doors. Gappsi provides Epoxy floors solutions to all residents on Long Island for both Nassau and Suffolk County NY.

Epoxy Floors installer Serving Nassau & Suffolk County Long Island NY

Share this page:

Do you need to pressure wash pavers before sealing them?

Do you need to pressure wash pavers before sealing them?Yes! All concrete and paver surfaces should be cleaned before applying any sealer coating. It is very important that the surface is clean because any stains or materials that get trapped under the sealer will not be able to be cleaned after it’s sealed. Pressure washing pavers is just as important as sealing it.
Using the wrong pressure washing tools could also hurt the pavers. A pressure washer with the wrong nozzle could mark or wear the pavers. The best recommended tool is a high volume, low pressure, hot water pressure washer. The hot water cleans the pavers and prepares the surface for the best result sealing job.

Long Island Paver Cleaning and Sealing Company

Share this page: